Marine Fasteners

COLORED FASTENERS

COLORED CAPS - All brass/nickel construction.
 

 

 

BLACK
Part Number Cost
#206

Per Each  $   0.68 Retail

#207

Per 100  $ 32.00 Retail


BLUE
Part Number Cost
#900

 Per Each  $   0.68 Retail

#901 Per 100  $ 32.00 Retail


BROWN
Part Number Cost
#902 Per Each  $   0.68 Retail
#903 Per 100  $ 32.00 Retail


BURGUNDY
Part Number Cost
#904

 Per Each  $   0.68 Retail

#905 Per 100  $ 32.00 Retail


CHARCOAL GRAY
Part Number Cost
#906 Per Each  $   0.68 Retail
#907 Per 100  $ 32.00 Retail


FOREST GREEN
Part Number Cost
#908 Per Each  $   0.68 Retail
#909 Per 100  $ 32.00 Retail


GRAY
Part Number Cost
#910 Per Each  $   0.68 Retail
#911 Per 100  $ 32.00 Retail


NAVY
Part Number Cost
#912 Per Each  $   0.68 Retail
#913 Per 100  $ 32.00 Retail


TEAL
Part Number Cost
#1004 Per Each  $   0.68 Retail
#1022 Per 100  $ 32.00 Retail


WHITE
Part Number Cost
#1353 Per Each  $   0.68 Retail
#1354 Per 100  $ 32.00 Retail


AQUAMARINE
Part Number Cost
#1015 Per Each  $   0.68 Retail
#1016 Per 100  $ 32.00 Retail


BEIGE
Part Number Cost
#1578 Per Each  $  0.68 Retail
#1579 Per 100  $ 32.00 Retail


RED
Part Number Cost
#1738 Per Each  $   0.68 Retail
#139 Per 100  $ 32.00 Retail

 

 

STANDARD FASTENERS - All brass/nickel construction.
Will NOT rust.

PART A - ROUND CAP Standard 3/16" brass-style post.

Part Number

Cost

#208

Each  $ 0.42 Retail

#209

Per 100  $ 20.20 Retail



PART A - ROUND CAP with stainless steel-style post.

Part Number

Cost

#914

Each  $ 0.50 Retail

#915

Per 100  $ 26.00 Retail



PART A - ROUND CAP with longer length post. (5/16")

Part Number

Cost

#916

Each  $ 0.54 Retail

#917

Per 100  $28.00 Retail



GYPSY STUDS - For fastening two separate pieces of canvas onto a screw stud (piggy-back style).

Part Number

Cost

#835

Each  $ 0.82 Retail

#836

Per 100  $ 38.20 Retail



PART B - SOCKET (Normal action)

Part Number

Cost

#210

Each  $ 0.40 Retail

#211

Per 100  $ 19.80 Retail



PART B - SOCKET (Hard action)

Part Number

Cost

#918

Each  $  0.50 Retail

#919

Per 100  $ 25.60 Retail



PART C - STUD

Part Number

Cost

#212

Each  $ 0.32 Retail

#213

Per 100  $  17.40 Retail



PART C - FLANGELESS STUD

Part Number

Cost

#634

Each  $ 0.32 Retail

#635

Per 100  $ 17.10 Retail



PART D - EYELET Standard 1/4" Post

Part Number

Cost

#214

Each  $  0.28 Retail

#215

Per 100  $  15.40 Retail

PART C - STUD LOW BASE
# 256 Each  $  0.34 Retail
# 267 Per 100 $ 18.60 Retail



PART D - EYELET Long 5/16" Post

Part Number

Cost

#692

Each  $ 0.36 Retail

#693

Per 100  $  17.60 Retail

 
DOT BRAND FASTENERS - All brass/nickel construction.
Will NOT rust.

PART A - DOT ROUND CAP Standard 1/4" brass-style post.

Part Number

Cost

#216

Each  $ 0.64 Retail

#217

Per 100  33.40 Retail



PART B - DOT SOCKET  (Normal Action)

Part Number

Cost

#218

Each  $ 0.54 Retail

#219

Per 100  $ 28.40 Retail



PART C - DOT STUD

Part Number

Cost

#220

Each  $ 0.38 Retail

#221

Per 100  $ 21.70 Retail



PART D - DOT EYELET  Standard 1/4" Post

Part Number

Cost

#222

Each  $  0.38 Retail

#223

Per 100  $ 21.40 Retail


SCREW STUDS - All nickel/stainless steel construction. For boats and automobiles.
Will NOT rust.

PART E - 3/8" LENGTH - Stainless screw stud.

Part Number

Cost

#224

Each  $ .96  Retail

#225

Per 100  $ 48.00 Retail



PART E - 5/8" LENGTH - Stainless screw stud.

Part Number

Cost

#226

Each  $ 1.10 Retail

#227

Per 100  $ 53.00 Retail



PART E - 1/2" LENGTH -
A stainless steel DRILL POINT screw stud.
Saves pre-drilling time.

Part Number

Cost

#228

Each  $ 1.30 Retail

#229

Per 100  $ 66.00 Retail



PART E - 5/8" LENGTH - A larger diameter #10 stainless screw stud used for stripped holes.

Part Number

Cost

#230

Each  $ 1.26 Retail

#231

Per 100  $ 62.50 Retail

 
ONE WAY FASTENERS - Very much like Pull-The-DOT.
This type of fastener has a tab built into it, so it only
comes off and goes on in one certain spot.
Made for a strong, secure hold.

Pull-The-DOT is a trademark of the Scovill Corp.

PART A - ONE WAY CAP - Standard length post.

Part Number

Cost

#957

Each  $ 1.08 Retail

#958

Per 100  $ 54.00 Retail



PART B - ONE WAY SOCKET

Part Number

Cost

#959

Each  $ 1.02 Retail

#960

Per 100  $ 52.00 Retail



SCREW STUDS 3/8" - ONE WAY Stainless steel.

Part Number

Cost

#961

Each  $ 1.98 Retail

#962

Per 100  $ 96.00 Retail

 
SNAP-FAST BRAND - Special style fasteners to replace original equipment.
Will NOT rust.

PART A
-
Pronged Metal Cap (Snap-Fast style)

Part Number

Cost

#837

Each  $ 1.90 Retail

#838

Per 100  94.40 Retail



PART B
-
Plastic Socket (Snap-Fast style)

Part Number

Cost

#839

Each  $ 0.66 Retail

#840

Per 100  $ 34.00 Retail



PART C - Plastic Stud WHITE

(Snap-Fast style)  Uses your screw.

Part Number

Cost

#841

Each  $ 0.90 Retail

#842

Per 100  $ 44.20 Retail



PART C - Plastic Stud BLACK

(Snap-Fast style) Uses your screw.

Part Number

Cost

#853

Each  $  0.90 Retail

#921

Per 100  $ 46.00 Retail

 
TURNBUCKLE STYLE FASTENERS

TWO SCREW BASE - DOUBLE - For one or
two layers of material. Two screw holes for
strength.  7/8" center to center screw holes.
13/16" height. 1 1/4" overall length. 3/8" overall width.
5/8" base tapers to 1/2" pivot crown.

Part Number

Cost

#753

Each  $ 4.50 Retail

#754

Per 100  $ 182.00 Retail



EYELET FOR TURNBUCKLE - Top part of ring to go on fabric over turnbuckle base.

Part Number

Cost

#877

Each  $ 0.80 Retail

#878

Per 100  $ 36.60 Retail



WASHER FOR TURNBUCKLE - Washer for underside of fabric. Plain Style.

Part Number

Cost

#955

Each  $ 0..50 Retail

#956

Per 100  $ 24.80 Retail



WASHER FOR TURNBUCKLE - Washer for underside of fabric. Slotted Style.

Part Number

Cost

#1029

Each  $ .80 Retail

#1030

Per 100  $ 35.50 Retail



TURNBUCKLE 2 PRONG - single base.

Part Number

Cost

#1595

Each $ 3.76 Retail

#1596

Per 100 $ 152.00 Retail



TURNBUCKLE CLINCH PLATE

Part Number

Cost

#1597

Each $ 0.36 Retail

#1598

Per 100 $ 17.30 Retail

 
CURTAIN FASTENERS

SOCKET - CURTAIN FASTENER
Standard leg 7/32".

Part Number

Cost

#963

Each  $ 2.50 Retail

#964

Per 100  124.40 Retail



BACKPLATE - CURTAIN FASTENER

Part Number

Cost

#965

Each  $ 0.88Retail

#966

Per 100  $44.00 Retail


SCREW STUD - CURTAIN FASTENER - 1/2"

1/2" STAINLESS STEEL SCREW STUD
CURTAIN FASTENER

Part Number

Cost

#1012

Each  $ 3.10 Retail

#1013

Per 100  $ 156.00 Retail

 

GROMMETS AND WASHERS

G-1 Brass sheet metal grommets and plain washers. Available in three sizes.

#1 - 9/32" Diameter of hole when set.

Part Number

Cost

#606

Per Dozen $ 5.10 Retail

#607

Per Gross (12 Dozen) $ 33.80 Retail



#2 - 3/8" Diameter of hole when set.

Part Number

Cost

#285

Per Dozen $ 6.40 Retail

#286

Per Gross (12 Dozen) $ 34.00 Retail



#4 - 1/2" Diameter of hole when set.

Part Number

Cost

#287

Per Dozen $ 12.90 Retail

#288

Per Gross (12 Dozen) $ 68.70 Retail

 

SPURRED GROMMETS

Brass rolled rim grommets and spurred washers.  Available in two sizes.


#2 - 3/8" Diameter of hole when set.

Part Number

Cost

#1025

Per Dozen $ 17.90 Retail

#1026

Per Gross (12 Dozen) $ 108.00 Retail



#4 - 1/2" Diameter of hole when set.

Part Number

Cost

#1027

Per Dozen $ 23.30 Retail

#1028

Per Gross (12 Dozen) $ 163.20 Retail

 

SNAP-CAPS
Snap Caps are marine grade caps that fit over #6 and #8(metric sizes M3 and M4) screws. Tops are 1/2 inch diameter (actually .52). A wonderful way to cover unsightly screws in visible places. Slide the bottom piece on the screw before insertion, install the screw and snap the cap in place. Protects the screw from rust and corrosion. Comes in a variety of colors! Sold tops and bottoms together by the 100 count.


Snap-Caps - White

Part Number

Cost

#1616

Per 100  $ 30.00 Retail


Snap-Caps - Off White

Part Number

Cost

#1617

Per 100  $ 30.00 Retail


Snap-Caps - Medium Saddle

Part Number

Cost

#1618

Per 100  $ 30.00 Retail


Snap-Caps - Morning Gray

Part Number

Cost

#1619

Per 100  $ 30.00 Retail


Snap-Caps - Chocolate

Part Number

Cost

#1620

Per 100  $ 30.00 Retail


Snap-Caps - Royal Blue

Part Number

Cost

#1621

Per 100  $ 30.00 Retail


Snap-Caps - Burgundy

Part Number

Cost

#1622

Per 100  $ 30.00 Retail


Snap-Caps - Black

Part Number

Cost

#1623

Per 100  $ 30.00 Retail

 

STAINLESS STEEL T-NUTS

1/4" Stainless Steel T-Nuts
- Four prongs for holding strength and a 7/16" barrel length.

Part Number

Cost

#1653

Each $ 2.40 Retail

#1654

Per 100 $ 134.00 Retail

 

CURTAIN TAIL SLIDES
MARINE INTERIOR CURTAIN TAIL SLIDES

Plastic sleeve sewn into boat curtain panels. Knob at top inserted into curtain rod.

Part Number

Cost

#393

Per 100  $ 76.00 Retail

 

STAYPUT FASTENERS
Ultimate

Stayput Shock Cord Clip

2.8 inches in length.

Part Number

Cost

#1651

Black - Each  $ 8.00 Retail

#1652

White - Each  $ 8.00 Retail

STAYPUT KNOBS

Uses your screw

Part Number

Cost

#550

Black - Each  $ 1.98 Retail

#562

White - Each  $ 1.98 Retail

 

CARPET FASTENERS

Two part Military Black ring-style fasteners that screw to the floor.

Part Number

Cost

#1133

Each  $  4.10 Retail

 

FASTENER TOOLS

Pres 'N Snap Tool

This tool is the most versatile tool for setting and snap,
as well as #1 grommets.
No need to pre-punch any holes. Replacement parts in stock.

Part Number

Cost

#589

Per Each $ 312.00 Retail

Replacement Dies for Press 'N Snap Tool

PART A - Cap
Part Number                           
Cost
#590            
Per Each   $  48.90 Retail
PART B - Socket
Part Number                           
Cost
#591            
Per Each   $  48.90 Retail
PART C - Stud
Part Number                           
Cost
#592            
Per Each   $  51.50 Retail
PART D - Eyelet
Part Number                           
Cost
#593            
Per Each   $  48.90 Retail
#1 GROMMET DIE SET
(Top and Bottom)
Part Number                            Cost
#594             Per Each   $  87.20 Retail
#2 GROMMET DIE SET
(Top and Bottom)
Part Number                            Cost
#922             Per Each   $  93.10 Retail
GYPSY STUD
Part Number                           
Cost
#920   
         Per Each   $  62.70 Retail
RUBBER RETAINERS FOR DIE
PARTS A AND D
Part Number                            Cost
#856               Per Each   $  4.80 Retail
O-RINGS FOR DIES
Part Number                            Cost
#886                 Per Each  $  0.94 Retail

 

 
Economy Hand-Held Snap Tool

A hand held tool for setting snaps. Used with a hammer to pound the posts down. Bottom part of this tool is plastic. A simple, helpful economical tool.

Part Number

Cost

#233

Each $  22.80 Retail


Premium Hand-Held Snap Tool

A hand held tool for setting snaps. Used with a hammer to pound the posts down. Both parts of this tool are metal. This is a more durable tool than the one listed previously.

Part Number

Cost

#879

Each $  58.00 Retail


Screw Stud Drill Adapter

Screw stud adapter for phillips head screws. Holds screw stud firmly in place, reducing "slips". It also eliminates pre-drilling in aluminum or fiberglass when used with our 1/2" stainless self-tapping screw stud.
Allen wrench and phillips bit included.

Part Number

Cost

#232

Each $  102.20 Retail

 
Quick-Fit Canvas Kit

A kit designed to help hold your piece of canvas in place, while you mark out your adjustments. Acts as a third hand, using pins fastened to the screw studs already existing on the boat, truck, etc. Kit includes 50 sockets and 25 caps to hold the canvas onto the socket-style pins. A metal release tool is also included.

Part Number

Cost

#843

Per Kit $ 175.00 Retail


Replacement Quick Fit Caps & Sockets:
Black Holding Cap(s)   Quantity - 1 - 99
Part Number                             
Cost
#430                                $ 2.64
Retail
Socket(s) (with pins)    Quantity - 1 - 99
Part Number                             
Cost
#1606                              $ 4.00
Retail

Black Holding Caps      Quantity - 100+
Part Number                             
Cost
#855                                $ 1.60
Retail

Sockets (with pins)       Quantity - 100+
Part Number                             
Cost
#1607                             $ 3.00
Retail

Quick-Fit Release Tool

Part Number

Cost

#1599

Each $ 9.50 Retail

 

Snap Lubricant

Iosso Zipper & Snap Lubricant. Use on snaps, zippers, hinges, and hardware. Lubricates, waterproofs, and reduces friction. Keeps snaps from corroding and locking up. Keeps zippers moving freely. E-Z snap will not be rinsed away by water and will not dissipate in hot weather. The formula is non-hazardous, and does not contain solvents, silicon, or Teflon. 1.5 ounce tube.

Part Number

Cost

#1591

Each $ 12.30 Retail

 

marine fasteners hardware boat fittings

Great Lakes Fabrics, Inc.

1904 S. Wenona St.
Bay City, Michigan 48706
1.800.652.2358 - U.S. Toll Free
989.893.3311 - Local & International
  989.893.5875 - Fax

Business Hours: Mon. - Fri.  8:00am to 5:30pm E.T.
Or Contact Us Anytime

[About Us] [Bulletin Board] [Secure Order Form] [Marine Canvas & Supplies]
[Upholstery Fabrics] [Upholstery Supplies] [Vinyl Fabrics] [Catalog Center] [Policies]